Control Data Corporation

Indeholder "Revision record", "Alphabetical list of commands", "List of effective pages", "Preface", " Audience", " Organization", " Conventions", "Contents", "1. System Description", " System Hardware", " Central Processor Unit", " Central Memory", " Job Field Length", " Central Memory Resident", " Extended Memory", " Peripheral Processors", " Peripheral Equipment", " System Software", " User Programs", " Operating System", " CYBER Loader", " CYBER Record Manager", "2. Files", " File show more Names", " File Structure", " CYBER Record Manager File Structure", " NOS File Structure", " Physical File Structure", " Card Files", " Mass Storage Files", " Magnetic Tape Files", " Tape Labels", " Tape Data Formats", " File Types", " Input Files", " Queued Files", " Local Files", " Primary Files", " Direct Access Files", " Library Files", " Permanent Files", " Indirect Access Permanent Files", " Direct Access Permanent Files", " Mass Storage File Residence", " Family Devices", " Auxiliary Devices", " Mass Storage Facility (MSF)", " Libraries", " User Name Library", " Program Libraries", " User Libraries", "3. Job Flow and Execution", " Job Initiation and Termination", " Batch Jobs", " Internative Jobs", " Login", " Logout and Application Switching Procedure", " Submitting Jobs to Remote Hosts", " Job Origin Types", " Job Service Classes", " Job Names", " Job Sequence Name (JSN)", " User Job Name (UJN)", " Validation", " Accounting", " Job Scheduling", " Job Control", " Field Length Control", " Input File Control", " Time Limit Control", " SRU Limit Control", " Command Limit Control", " Rollout Control", " Error Control", " Security Features", " Memory Protection", " System and File Access Controls", " Security Access Levels", " Security Access Catagories", " Responsibilities for Data Security", " Security Conflict Processing", " Job Completion", "4. Procedures", " Procedure Structure", " Procedure Directives", " Procedure Header (.PROC) Directive", " Formatting and Help Directives", " .CORRECT Directive", " .ENDHELP Directive", " .ENTER Directive", " .Fn Directive", " .HELP Directive", " .NOCLR Directive", " .NOTE Directive", " .PAGE Directive", " .PROMPT Directive", " File Directives", " .DATA Directive", " .EOF Directive", " .EOR Directive", " Branching Directives", " .ELSE Directive", " .ENDIF Directive", " .EX Directive", " .IF (or .IFE) Directive", " .COMMENT (.*) Directive", " Parameters and the Procedure Body", " Calling a Procedure (BEGIN Command)", " Requesting Help on Procedure Calls", " Ending a Procedure (REVERT Command)", " Parameter Matching Modes", " Order-Dependent Mode", " Order-Independent Mode", "5. Command Processing", " Command Format", " Command Processing Flow", " Exit Processing", "6. Execution Control Commands", " Command Syntax", " Arithmetic Operators", " Relational Operators", " Logical Operators", " Order of Evaluation", " Operands", " Constants", " Numeric Strings", " Literals", " Symbolic Names", " Functions", " FILE Function", " DT Function", " NUM Function", " Command Descriptions", " BEGIN Command", " DISPLAY Command", " ELSE Command", " ENDIF Command", " ENDW Command", " EXIT Command", " IFE Command", " MODE Command", " NOEXIT Command", " ONEXIT Command", " REVERT Command", " SET Command", " SKIP Command", " WHILE Command", "7. Job Control Commands", " CFO Command", " CHARGE Command", " CHVAL Command", " CLASS Command", " COMMENT Command", " CTIME Command", " DAYFILE Command", " DROP Command", " ENQUIRE Command", " ENTER Command", " GO Command", " HTIME Command", " Job Command", " LDI Command", " LENGTH Command", " LIMITS Command", " Resource Limits", " Other Characteristics", " User Permissions", " Network Applications", " Local Applications", " Privileged Network Applications", " Shell Permissions", " Security Permissions", " Security Access Categories", " Security Access Levels", " Service Classes", " Default Service Classes", " MACHINE Command", " MFL Command", " NORERUN Command", " NOTE Command", " OFFSW Command", " ONSW Command", " PASSWOR Command", " PAUSE Command", " PROTECT Command", " QGET Command", " QUEUE7 Command", " RERUN Command", " RESOURC Command", " Deadlock Prevention", " Single Resource Use", " Tape Units", " Resource Overcommitment", " Altering Resource Requirements", " Unit Assignment", " RFL Command", " ROLLOUT Command", " RTIME Command", " SETASL Command", " SETCORE Command", " SETJAL Command", " SETJOB Command", " SETJSL Command", " SETPR Command", " SETTL Command", " SHELL Command", " STIME Command", " SUBMIT Command", " SUMMARY Command", " SWITCH Command", " UPROC Command", " USECPU Command", " USER Command", "8. Commands for Interactive Jobs", " Terminal Control Commands", " ASCII Command", " AUTO Command", " BRIEF Command", " CSET Command", " LINE Command", " NORMAL Command", " SCREEN Command", " TIMEOUT Command", " TRMDEF Command", " Subsystem Selection Commands", " ACCESS Command", " BASIC Command", " BATCH Command", " EXECUTE Command", " FORTRAN Command", " FTNTS Command", " NULL Command", " Interactive Status Commands", " Detach Command (crD)", " Immediate Job Status Command (ctE)", " Abbreviated Job Status Command (ctS)", " Job Processing Commands", " BYE Command", " DIAL Command", " EXPLAIN Command", " GOODBYE Command", " HELLO Command", " HELLO7 Command", " HELLO7 Directives", " HELP Command", " LIB Command", " LIST Command", " LOGIN Command", " LOGOUT Command", " NOSORT Command", " RECOVER Command", " RUN Command", " Secure Login Command", " TEXT Command", " WHATJSN Command", " X Command", " Primary File Editing Commands", " Parameter Format", " Suppressing Editing Responses", " Line Number Overlap", " Inserting Lines", " ALTER Command", " DELETE Command", " DUP Command", " LIST Command", " MOVE Command", " READ Command", " RESEQ Command", " WRITE Command", " WRITEN Command", "9. File Management Commands", " ASSIGN Command", " BKSF Command", " CLEAR Command", " COPY Command", " Copy Termination", " Block Sizes", " Processing Options", " COPYBF Command", " COPYBF Command", " COPYBR Command", " COPYCF Command", " COPYCR Command", " COPYEI Command", " CGPYSBF Command", " COPYX Command", " DOCMENT Command", " EVICT Command", " FCOPY Command", " LIST80 Command", " LOCK Command", " L072 Command", " MQUEUE Command", " Parameter Descriptions", " The Routing Directive", " NEW Command", " OUT Command", " PACK Command", " PRIMARY Command", " RENAME Command", " REQUEST Command", " RESEQ Command", " RETURN Command", " REWIND Command", " ROUTE Command", " Parameter Descriptions", " Implicit Routing", " SCOPY Command", " SECHDR Command", " SETFAL Command", " SETFS Command", " SKIPEI Command", " SKIPF Command", " SKIPFB Command", " SKIPR Command", " SORT Command", " TCOPY Command", " TDUMP Command", " UNLOAD Command", " UNLOCK Command", " VERIFY Command", " WRITEF Command", " WRITER Command", "10. Permanent File Commands", " Common Parameters", " APPEND Command", " ATTACH Command", " CATLIST Command", " CHANGE Command", " COMMON Command", " DEFINE Command", " GET Command", " MFLINK Command", " MFLINK Directives", " APPEND Directive", " ATTACH Directive", " CATLIST Directive", " CHANGE Directive", " CHARGE Directive", " DEFINE Directive", " GET Directive", " PACNNAM Directive", " PERMIT Directive", " PURGE Directive", " REPLACE Directive", " SAVE Directive", " USER Directive", " Interactive Use of MFLINK", " OLD Command", " PACKNAM Command", " PERMIT Command", " PURGALL Command", " PURGE Command", " REPLACE Command", " SAVE Command", " SETPFAC Command", " SETPFAL Command", "11. Load/Dump Memory Commands", " DMB Command", " DMD Command", " DMDECS Command", " DMP Command", " DMPECS Command", " LBC Command", " LOC Command", " PBC Command", " RBR Command", " WBR Command", "12. Tape Management", " Tape Assignment", " Command Rules", " Processing Options", " ASSIGN Command", " BLANK Command", " LABEL Command", " LISTLB Command", " REQUEST Command", " VSN Command", "13. Checkpoint / Restart", " CKP Command", " RESTART Command", "14. System Utility Commands", " EDIT Command", " FSE Command", " KRONREF Command", " MODIFY Command", " OPLEDIT Command", " PDU Command", " PROFILE Command", " UPDATE Command", " XEDIT Command", "15. Library Maintenance", " Library File Access Methods", " Library Record Types", " CATALOG Command", " COPYL and COPYLM Commands", " GTR Command", " ITEMIZE Command", " LIBEDIT Command", " Command Format", " LIBEDIT Directives", " ADD Directive", " BEFORE Directive", " BUILD Directive", " COMMENT Directive", " COPY Directive", " DATE Directive", " DELETE Directive", " FILE Directive", " IGNORE Directive", " INSERT or AFTER Directive", " LIBGEN Directive", " LIST Directive", " NEW Directive", " NOINS Directive", " NOREP Directive", " NOREW Directive", " OLD Directive", " RENAME Directive", " REPLACE Directive", " REWIND Directive", " TYPE or NAME Directive", " VFYLIB Directive", " LIBEDIT Output", " LIBGEN Command", " ULIB Command", " VFYLIB Command", " Library Processing Examples", "16. Terminal Input/Output", " Terminals", " Input/Output Conventions", " Input From Terminal", " Length of Input/Output Lines", " Terminating Input Line", " Correcting Input Line", " Deleting Input Line", " Entering Input Before Prompts", " Page Wait", " Suspending Output", " Aborting Output Line", " Interrupting Job Step", " Terminating Job Step", " Continuing a Suspended Job", " Using ATTN on IBM 2741 Terminals", " Control Bytes", "Appendixes", "A. Character Sets", " Character Set Anomalies", " Character Set Tables", " Interactive Jobs", " Batch Jobs", " Jobs Using Line Printers", " Jobs Using Magnetic Tapes", "B. Diagnostic Messages", "C. Glossary", "D. Sample Job Output", "E. Terminal Character Conversion", " Data Input", " Data Output", "F. Card File Data Conversion", " Input Card File Formats", " Coded Cards", " Conversion Modes", " Literal Input", " Binary Cards", " Summary", " Punch File Formats", " Coded Cards (Punch)", " Binary Cards (Punch B)", " Absolute Binary Cards (P8)", "G. Ansi Tape Label Formats", " Required Labels", " VOL 1 - Volume Header Label", " HDR1 - First File Header Label", " E0F1 - First End-Of-File Label", " E0V1 - First End-Of -Volume Label", " Optional Labels", " HDR2 through HDR9 - Additional File Header Labels", " E0F2 through EOF9 - Additional End-Of-File Labels", " E0V2 through E0V9 - Additional End-Of-Volume Labels", " User Labels", "H. Line Printer Carriage Control", " Printed Data", " Paper Length", " Carriage Control", " Format Channel Selection on Non-PFC Printers", " Carriage Control Arrays for 580 Printers", " PFC Array Syntax", " Example", "I. Obsolete Tape Formats", " B (Blocked) Format", " E (Line Image) Format", " X (External) Format", " End-Of-Tape/End-Of-Reel Conditions", "J. TERMINAL DEFINITION COMMANDS", " Introduction", " Terminal Definition Command Format", " Restrictions", " Terminal Definition Commands", " (AB) - Abort Output Block Character", " (AR) - Automatic Character Recognition", " (BF) - Blocking Factor", " (BR) - Break Key as User Break 1", " (BS) - Backspace Character", " (B1) - Interruption or User Break 1 Character", " (B2) - Termination or User Break 2 Character", " (CH) - Display Terminal Characteristics", " (CI) - Carriage Return Idle Count", " (CN) - Cancel Character", " (CP) - Cursor Positioning after Input", " (CT) - Network Control Character", " (DL) - Delimiters for Single-Message Transparent Input Mode", " (EB) - End-of-Block Character", " (EL) - End-of-Line Character", " (EP) - Echoplex Mode", " (FA) - Full-ASCII Input Mode", " (HD) - Display of Hosts Nodes", " (HN) - Host Node Selection", " (HS) - Host Selection", " (IC) - Flow Control for Input Devices", " (IN) - Input Device and Transmission Mode", " (LI) - Line Feed Idle Count", " (LK) - Lockout of Unsolicited Messages", " (MS) - Message to Network Operator", " (OC) - Flow Control for Output Devices", " (OP) - Output Device Selection", " (PA) - Parity Processing", " (PG) - Page Waiting", " (PL) - Page Length", " (PW) - Page Width", " (SE) - Special Editing Mode", " (TC) - Terminal Class Command", " (TM) - Terminating a Terminal-Host Connection", " (XL) - Multimessage Transparent Mode", "K. Delimiting and Transmitting Terminal Input", " Physical End-of-Line (Line Feed)", " Logical End-of-Line (Carriage Return)", " Message Transmission", "L. Passive Procedures", " .PROC Directive", " Procedure and Parameter Descriptions", " Parameter Matching", " Order-Dependent Parameter Matching Mode", " Order-Independent Parameter Matching Mode", "M. Paper Tape Operations", " General Description", " Teletypewriter", " Control Characters", " Input Lines", " Punching Tape Off-Line", " Tape Mode", " Punching a Tape On-Line", " Corrections", "N. Mass Storage Device Statistics", "O. Interactive Transfer Facility (ITF)", " Selecting the ITF Application", " Selecting a Remote CYBER 200 System", " Processing Your Job on the Remote Cyber 200", " Terminating Your ITF Session", "Index", "Figures", " Central Memory Allocation", " Logical Structure of Files", " NOS and CRM File Terminology", " Sample Card File Structure", " Use of ANSI Labels", " FORTRAN Compile and Execute", " Submitting Jobs to Remote Hosts", " The Structure of a Procedure", " Summary of Checklist Patterns", " Calling a Procedure", " Command Processing Flow", " QUEUE7 Execute Queue Sample Listing", " QUEUE7 Input Queue Sample Listing", " QUEUE7 Output Queue Sample Listing", " Resource Commitment Processing (Simplified)", " Random Access File Structure", " LIBEDIT Input and Output", " User Library Structure", " Maximum Size of Global Library Set", " Examples of Coded Card Conversion", " Carriage Control Tape Format (Standard Paper Length; 6LPI)", " Carriage Control Tape Format (Short Paper Length; 8LPI)", " Keyword Substitution in Two Procedures", " Keyword Substitution in Nested Procedures", "Tables", " Physical File Structure on Different Devices", " Procedure Directives", " Programmable Function Keys for Procedures", " Help on Procedure Calls", " Range of Permissible Formats for the COPY Command", " Compatible File Structures for the VERIFY Command", " Access Mode Granted When Attaching a Currently Attached Direct Access File", " Character Sets for Interactive Jobs", " Character Sets for Batch Jobs", " ASCII to 6/12-Bit Display Code Conversion", " Nine-Track ASCII Coded Tape Conversion", " Nine-Track EBCDIC Coded Tape Conversion", " Seven-Track Coded Tape Conversions", " Carriage Control Characters", " Default Terminal Definitions", " Parameter Ranges for Terminal Definition Commands", " Default Message Delimiters and Transmission Keys", " Parameter Substitution in Order-Dependent Mode", " Parameter Substitution in Order-Independent Mode".

De glade dage med CDC 63-tegnsæt og senere 64-tegnsæt. 8i12 Ascii med CDC konvention for linieskift (kontroltegnet i position 9 og 10 i et maskinord). 60-bit maskinord med samme format til integer og reals, så man kunne gange et heltal med 10 og teste om det blev større end MAXINT og alle den slags tricks. Manualen er faktisk mere end ok. Der er nyttige eksempler og jeg har de sidste 35 år læst mange meget værre eksempler på dokumentation.

Der er sikkerhedsovervejelser og fx en DAYFILE hvor systemet skriver meddelelser til brugeren. Gode ideer til verden anno 2015, suk! Nogle af kommandoerne havde sjove navne, fx PURGALL, som slettede filer og som kunne gives temmelig mange parametre, så man ikke var helt sikker på hvad man slettede. DMPECS kunne skrive extended memory ud til en fil. Også selv om der stod noget, man bare havde overtaget fra en andens job. Også selv om der fx stod passwords i klar tekst. show less

Indeholder "Introduction", "1. System Description", " Purpose", " Terminals", " System Response", " Job Processing", " Interactive Processing", " Batch Processing", " Files", " Security and Accounting", "2. Terminal Operation", " Initiating Terminal", " Dedicated Line Operation", " Data Set Operation", " Display Terminal", " Teletype Terminal", " Teletype Terminal", " Teletype Entry", " Error Correction", " Interrupt", " Teletype Keyboard", " Paper Tape Operation", " Paper Tape Punch", " show more Paper Tape Reader", " Display Terminal", " Display Screen", " Display Entry", " Line Indicator", " Entry Marker", " Message Terminator", " Error Correction", " Interrupt", " Display Keyboard", " Card Reader Operation", " Listing Cards", " Line Printer Operation", "3. Command Mode", " INTERCOM Commands", " Command Syntax", " SCOPE Control Cards", " Examples", " Communication with INTERCOM", " LOGIN Command", " TEACH Command", " SCREEN Command", " LOGOUT Command", " Communication Between Terminals", " SITUATE Command", " LOCK/UNLOCK Commands", " SEND Command", " Communication with Central Site", " Messages to Central Site", " Messages from Central Site", " File Control", " Permanent Files", " FILES Command", " PAGE Command", " CONNECT/DISCONT Commands", " PASSWORD File", " ASSETS Command", " ETL Command", " EFL Command", " Submitting a Job", " BATCH Command", " BATCH Command Dispositions", " SETUP Command", " Diagnostic Messages", " PEANUTS Command", " DIAXNOS Command", "4. Setup", " General Description", " Text Buffer", " Directives", " Entering SETUP", " SYSTEM Directive", " OLD/NEW Directive", " Exit from SETUP", " Editing", " Line Numbers", " FORTRAN", " BASIC", " General", " Line Editing", " Intra-Line Editing", " RESEQ Directive", " TRANS Directive", " TAB Directive", " DELETE Directive", " File Storage and Manipulation", " SAVE Directive", " UNSAVE Directive", " RENAME Directive", " LIST Directive", " Termination of List", " SCRATCH Directive", " PERMANENT Directive", " Compilation and Execution", " Interaction", " Compiler Calls", " RUN Directive", " BASIC Compile and Execute", " FORTRAN RUN Compile and Execute", " FORTRAN Extended Compile and Execute", " COBOL Compile and Execute", " Stopping Execution", "5. Remote Batch Processing", " General Description", " Initiating Batch Processing", " Processing Jobs", " Batch Processing Commands", " Command Syntax", " Jobname Parameter", " Reading Cards", " Read Errors", " Terminating Reading", " Printing Output", " Printing Errors", " Reprinting Current Output", " Suspending Printing", " Continuing Printing", " Terminating Printing", " Resuming Operations with GO", " Terminal Displays", " H Display", " B Display", " Stopping Display with END", " Output Manipulation", " Diverting Output", " Changing Output Priority", " Dropping Jobs from Execution", "Appendix A. Hardware Configuration", "Appendix B. System Error Messages", "Appendix C. Response to Commands and Directives", "Appendix D. Carriage Control Characters", "Appendix E. Character Set and Code Conversion", "Appendix F. Central Site Operator Commands", "Figures", " 2.1 Model 33 Teletype", " 2.2 Model 35 Teletype", " 2.3 Teletype Standard Keyboard", " 2.4 Punced Tape Format", " 2.5 Standard Display Keyboard", " 5.1 H,I Display: Jobs in Input Queue", " 5.2 H,O Display: Jobs in Output Queue", " 5.3 H,D Display: Jobs in Dependency Queue", " 5.4 B Display: Jobs in Execution", "A-1 Mixed Configuration with 5 Display and 15 Teletype Terminals".

Det er faktisk ret svært at forklare hvor lidt man egentlig kunne bruge en mainframe anno 1970 til. Man kunne editere en linienummereret fil ved at gå rundt i den linie for linie og rette ting. Jubii. Og så kunne man sende sine programmer afsted som batch-jobs og måske gå en tur hen til linieskriveren og få operatøren til at sende ens output ud på den dyre printer og give det videre, så man kunne begynde at kigge på hvad man havde fået lavet af fejl. show less

Indeholder "1. ALGOL SYSTEM DESCRIPTION", "1.1 Compiler Features", "1.2 Compiler Package", "1.3 Compiler Structure", "1.4 Library Subprograms", "2. LANGUAGE COMPARISON WITH THE ALGOL-60 REVISED REPORT", "2.1 Language Conventions", " Revised Report on the Algorithmic Language ALGOL-60", " Summary", " Contents", " Introduction", " 1. Structure of the Language", " 1.1 Formalism for syntactic description", " 2. Basic Symbols, Identifiers, Numbers, and Strings.", " Basic Concepts.", " 2.1 show more Letters", " 2.2 Digits, Logical values", " 2.3 Delimiters", " 2.4 Identifiers", " 2.5 Numbers", " 2.6 Strings", " 2.7 Quantities, kinds and scopes", " 2.8 Values and types", " 3. Expressions", " 3.1 Variables", " 3.2 Function designators", " 3.3 Arithmetic expressions", " 3.4 Boolean expressions", " 3.5 Designational Expressions", " 4. Statements", " 4.1 Compound statements and blocks", " 4.2 Assignment statements", " 4.3 Go to statements", " 4.4 Dummy statements", " 4.5 Conditional statements", " 4.6 For statements", " 4.7 Procedure statements", " 5. Declarations", " 5.1 Type declarations", " 5.2 Array declarations", " 5.3 Switch declarations", " 5.4 Procedure declarations", " Examples of Procedure Declarations", " Alphabetic Index of Definitions of Concepts and Syntactic Units", "3. INPUT/OUTPUT", "3.1 Comparison with ACM Proposal for Input/Output", " A Proposal for Input-Output Conventions in ALGOL-60", " A. Formats", " A.1 Number formats", " A.2 Other formats", " A.3 Format strings", " A.4 Summary of format codes", " A.5 "Standard" format", " B. Input and Output Procedures", " B.1 General characteristics", " B.2 Horizontal and vertical control", " B.3 Layout procedures", " B.4 List procedures", " B.5 Input and output calls", " B.6 Control procedures", " B.7 Other procedures", " C. An Example", " D. Machine-dependent portions", "3.2 Additional Input-Output Procedures", "3.3 Control Procedures", "3.4 Hardware Function Procedures", "3.5 Miscellaneous Procedures and Functions", "3.6 Input/Output Errors", "3.7 End of Partition", "3.8 Efficient Use of Formatted Input/Output", "3.9 Extended Core Storage, Large Core Memory Procedures", "4. INPUT TO COMPILATION", "4.1 Source Program Definition", "4.2 Source Procedure Definition", "4.3 Source Input Restrictions", "4.4 Language Conventions", "4.5 Source Line Conventions", "4.6 Source Deck", "5. OUTPUT FROM COMPILATION", "5.1 Binary Output", "5.2 Assembly Language Object Code", "5.3 Source Listing", "6. ALGOL CONTROL STATEMENT", "6.1 Control Card Parameters", "6.2 Restrictions and Errors", "6.3 Compilation and Execution Field Length", "7. CHANNEL STATEMENTS", "7.1 Channel Define Statement", "7.2 Channel Equate Statement", "7.3 Duplication of Channel Numbers", "7.4 Duplication of File Names", "7.5 Standard ALGOL Channel Statements", "7.6 Typical Channel Statements", "8. RUN TIME OPTIONS", "8.1 Options", "8.2 Example", "9. DEBUGGING FACILITIES", "9.1 General Description", "9.2 Debugging Directives", "9.3 Monitoring Messages", "9.4 Monitoring of Simple Variables", "9.5 Monitoring of Arrays", "9.6 Monitoring of Labels", "9.7 Monitoring of Procedures", "10. OVERLAYS", "10.1 Overlay Declarations", "10.2 Example", "10.3 Semantics", "10.4 Restrictions", "10.5 Examples", "11. USE OF LCM AND ECS", "11.1 Virtual Arrays and S Option", "11.2 Data Stacks in ECS/LCM", "12. OPTIMIZATION", "12.1 Machine Independent Optimization", "12.2 Vector Functions", "12.3 Efficient Programming for Run-Time Performance", "13. EXECUTION TIME ABNORMAL TERMINATION DUMP", "13.1 Structured Dump", "13.2 Environmental Information", "13.3 Cross-Reference Listing", "14. RUN-TIME DESCRIPTION", "14.1 Object Program and Stacks", "14.2 Stack Entries", "14.3 Details of Descriptors", "15. DIAGNOSTICS", "15.1 Compiler Diagnostics", "15.2 Object Time Diagnostics", "15.3 ALGEDIT Diagnostics", "16. ALGOL INTERACTIVE DEBUGGING AIDS", "16.1 Interactive Mode", "16.2 Interactive Commands", "16.3 Fatal Errors", "16.4 Using AIDA in Batch Mode", "16.5 Example", "17. ALGEDIT", "17.1 ALGOL Interactive Syntax Checker", "17.2 ALGEDIT Command Syntax", "17.3 Special Characters", "17.4 Accessing ALGEDIT", "17.5 Exiting from ALGEDIT", "17.6 File Creation and Modification", "17.7 File Storage and Display", "17.8 Syntax Checking", "17.9 Compilation and Execution", "17.10 Example", "APPENDIXES", "A. STANDARD CHARACTER SETS", "B. INTERFACE MACROS", "C. HARDWARE REPRESENTATION OF ALGOL SYMBOLS", "D. STANDARD PROCEDURES FOR VECTOR AND MATRIX MANIPULATIONS", "E. GLOSSARY".

Dette er mestendels en beskrivelse af Algol-60 og sekundært en beskrivelse af CDC's forskellige modifikationer i denne implementation. Compileren er en fler-pass compiler, så den er sikkert inspireret af Regnecentralens implementation. show less